Hardness: ~82–90 D.
Viscosity (at 25°C): ~50–250 cP.
Liquid density: ~1.10–1.15 g/cm³ (typical).
Tensile strength (post-cure): ~40–88 MPa.
Flexural modulus / elastic modulus: ~2–11 GPa.
Linear shrinkage: <2% for low-shrink engineering formulations.

Engineering prototypes, stiff functional parts.
Short-run injection mold masters / inserts and tooling.
Fixtures, gauges and assembly jigs that require low deflection.
High-accuracy parts for automotive, aerospace, electronics and industrial equipment.

Very high stiffness and dimensional stability after proper UV + heat post-cure.
Low linear shrinkage formulation for accurate, tight-tolerance parts.
Good thermal and chemical resistance for jigs, fixtures, mold masters and functional prototypes.